ULT 80
80 mm shaft / 120 mm outer diameter. Data source: UVT Catalog 2024. The approved drawing governs ordering.
Dimensional & Load Reference
| Shaft diameter d | 80 mm |
|---|---|
| Outer diameter D | 120 mm |
| Catalog dynamic load C | 92800 N |
| Catalog static load C₀ | 108000 N |
| Dynamic / static torque | On request |
| Shaft lengths / travel | Reference lengths: 2000 / 3000 / 4000 mm; confirm length for your stroke |
| Nut length & mounting dimensions | See the configuration drawing |
| Load direction & rating conditions | Confirmed for your load case |
| Accuracy & preload | Series-specific suffix codes |
| Source | UVT Catalog 2024 · page 14 |
Load ratings alone do not confirm life, speed or installation suitability.
Selection Guides & CAD Requests
English PDF guides are general references, not configuration-specific CAD. Request 2D / 3D drawings for your model, shaft length and suffixes.
Request This Exact Configuration →Required Operating Conditions
Shaft and housing envelope, nut retention / flange dimensions, shaft length, travel, radial load and load direction, torque, speed, duty cycle, accuracy, preload and lubricant/environment.
Specify the Complete Assembly
Select series and size; L long nut or A hollow shaft only where offered; C nut count; R shaft length; T0 clearance, unmarked standard or T1 light preload; accuracy and S1/S2 mating identification. Confirm available suffixes against this series drawing.
ULT Operating Precautions
Verify housing or flange dimensions, axial retention and alignment using the exact drawing. Avoid removing the nut without a dummy shaft; confirm lubricant and interval for the application.
Cleanroom, vacuum, corrosion and special lubricants require individual review.
Selection & maintenance FAQs →